New Version Release of Model Order Reduction Software NewtonSuite-MOR
Newtonworks has released "MOR 2025.1", the latest version of its FEM model reduction software "NewtonSuite-MOR". This update reduces computational load while maintaining the dynamic characteristics of 3D models, enhancing integration with system-level analysis, and powerfully supporting front-loading and optimization in product development.
📋 Article Processing Timeline
- 📰 Published: May 12, 2026 at 18:00
- 🔍 Collected: May 12, 2026 at 09:31
- 🤖 AI Analyzed: May 12, 2026 at 10:07 (35 min after Collected)
Newtonworks Co., Ltd. (Headquarters: Chuo-ku, Tokyo; Representative Director and President: Toshikazu Yamanashi) has released "MOR 2025.1", the latest version of its independently developed program "NewtonSuite-MOR" which reduces the stiffness matrix of FEM (Finite Element Method) models.
Technology to link product dynamic characteristics with system-level analysis (1DCAE)!
Bridging 3DFEM and 1DCAE: "NewtonSuite-MOR"
In design and development, simulations using detailed 3D models are indispensable. However, in 1D CAE (system simulation) which grasps the behavior of the entire system, it was difficult to incorporate 3D models with enormous degrees of freedom directly due to computational load. NewtonSuite-MOR realizes Model Order Reduction (model order reduction) technology, reducing the created 3D models while accurately maintaining their dynamic characteristics. This further powerfully supports "front-loading" and "design optimization" in increasingly complex product development environments.
*Reduction: A technology that reduces shape information (stiffness matrix) used in 3DCAE to a state where arbitrary dynamic characteristics can be expressed.
MOR Product Overview here
Main Added Features
Command execution function
Batch execution using commands is now possible in addition to conventional GUI settings.
Usage Scenes
1. Vibration analysis: System-level evaluation while maintaining 3D vibration characteristics.
2. Control system design: Verification of control logic considering structural stiffness and damping.
3. Digital twin construction: Generation of lightweight models that can be installed in real-time simulators.
About Newtonworks Co., Ltd.
An independent engineering solution provider that supports the manufacturing industry with advanced technical capabilities, with CAE (Computer Aided Engineering) as its core business. Provides a wide range of solutions covering all phases of product development, from FEM (Finite Element Method) analysis that precisely captures the physical behavior of products from a microscopic perspective, to 1DCAE (system simulation) that macroscopically models the behavior of the entire system in the upstream process, supporting our customers.
Furthermore, a major feature is the "NewtonSuite" series of in-house developed software, which condenses the know-how cultivated through many years of support and consulting. In addition to selling these latest software, we provide one-stop services including advanced analysis consulting by experienced engineers, contract analysis, and specialized technical training. We solve challenges faced by Japanese manufacturing industries in various fields such as automotive, energy, and more, providing total backup for next-generation product development.
What is NewtonSuite?
A group of original CAE software developed by Newtonworks. NewtonSuite is original software independently developed by our company in response to customer requests. It has realized customer requests like "it would be nice to have" in daily development work, such as input data conversion tools between different software, tribology analysis tools, modeling of surface roughness and boundary non-linearity, seal analysis, quality engineering tool linkage, and performance impact due to tolerances.
What is NewtonSuite-MOR?
Software that reduces the characteristics of 3DCAE. Reduced elements can be incorporated into SimulationX and other 1DCAE. First released in 2013, developed ahead of its time.
MOR Product Overview here
[Contact for this matter]
Newtonworks Co., Ltd.
Marketing Group
Phone: 03-3535-2631
Email: info@newtonworks.co.jp
Keywords:
Technology to link product dynamic characteristics with system-level analysis (1DCAE)!
Bridging 3DFEM and 1DCAE: "NewtonSuite-MOR"
In design and development, simulations using detailed 3D models are indispensable. However, in 1D CAE (system simulation) which grasps the behavior of the entire system, it was difficult to incorporate 3D models with enormous degrees of freedom directly due to computational load. NewtonSuite-MOR realizes Model Order Reduction (model order reduction) technology, reducing the created 3D models while accurately maintaining their dynamic characteristics. This further powerfully supports "front-loading" and "design optimization" in increasingly complex product development environments.
*Reduction: A technology that reduces shape information (stiffness matrix) used in 3DCAE to a state where arbitrary dynamic characteristics can be expressed.
MOR Product Overview here
Main Added Features
Command execution function
Batch execution using commands is now possible in addition to conventional GUI settings.
Usage Scenes
1. Vibration analysis: System-level evaluation while maintaining 3D vibration characteristics.
2. Control system design: Verification of control logic considering structural stiffness and damping.
3. Digital twin construction: Generation of lightweight models that can be installed in real-time simulators.
About Newtonworks Co., Ltd.
An independent engineering solution provider that supports the manufacturing industry with advanced technical capabilities, with CAE (Computer Aided Engineering) as its core business. Provides a wide range of solutions covering all phases of product development, from FEM (Finite Element Method) analysis that precisely captures the physical behavior of products from a microscopic perspective, to 1DCAE (system simulation) that macroscopically models the behavior of the entire system in the upstream process, supporting our customers.
Furthermore, a major feature is the "NewtonSuite" series of in-house developed software, which condenses the know-how cultivated through many years of support and consulting. In addition to selling these latest software, we provide one-stop services including advanced analysis consulting by experienced engineers, contract analysis, and specialized technical training. We solve challenges faced by Japanese manufacturing industries in various fields such as automotive, energy, and more, providing total backup for next-generation product development.
What is NewtonSuite?
A group of original CAE software developed by Newtonworks. NewtonSuite is original software independently developed by our company in response to customer requests. It has realized customer requests like "it would be nice to have" in daily development work, such as input data conversion tools between different software, tribology analysis tools, modeling of surface roughness and boundary non-linearity, seal analysis, quality engineering tool linkage, and performance impact due to tolerances.
What is NewtonSuite-MOR?
Software that reduces the characteristics of 3DCAE. Reduced elements can be incorporated into SimulationX and other 1DCAE. First released in 2013, developed ahead of its time.
MOR Product Overview here
[Contact for this matter]
Newtonworks Co., Ltd.
Marketing Group
Phone: 03-3535-2631
Email: info@newtonworks.co.jp
Keywords: