[New Release] Solving Problems for Heavy Vehicles! Long Booster Cable for the 24V-Compatible Jump Starter 'SPEEDER Ignic Max' Now Available
Mitsukin Shoji Co., Ltd. has released the 'Long Booster Cable (SP-MAX1224)' for their 'SPEEDER Ignic Max' supercapacitor jump starter, compatible with 12V/24V vehicles. It features an extended total length of 145cm, adding 11cm to both the positive and negative terminals.
📋 Article Processing Timeline
- 📰 Published: May 21, 2026 at 19:00
- 🔍 Collected: May 21, 2026 at 10:31
- 🤖 AI Analyzed: May 21, 2026 at 10:47 (16 min after Collected)
The 'SPEEDER Supercapacitor Jump Starter Ignic Max,' used for rescuing large trucks, construction machinery, and agricultural vehicles, has been favored by many professionals for its overwhelming power.
However, we have received numerous valuable requests from customers using it in the field daily, stating, 'Battery locations on large vehicles are often specialized, making standard cables difficult to reach,' and 'If the cable were a bit longer, I could place the device in a safer location to work.'
In response to these urgent voices from the field, we have developed a dedicated long cable to dramatically improve work safety and convenience.
## Features of the New 'Long Booster Cable for Ignic Max'
### Total Length of 145cm for Ease of Use
Significantly extended from the standard included cable (123cm total). By adding 11cm to both the positive and negative sides, it allows smooth connection even for large batteries with terminals spread far apart or located in deep, hard-to-reach areas.
### Improved Work Efficiency
The extra cable slack allows the jump starter unit to be placed on a stable, flat surface during operation, preventing accidental drops and operational errors.
### Designed Exclusively for Max
It is exclusively designed to safely transmit the high power of 12V/24V, maximizing the performance of the Ignic Max.
## About the 24V-Compatible Powerhouse: 'SPEEDER Ignic Max'
Serving as the base for the long cable, the 'SPEEDER Ignic Max' is a professional model that masters capacitor technology.
### Capacitor Type: No Pre-charging Required
Because it draws and amplifies the faint power remaining in the battery, no pre-charging or regular maintenance is needed.
### Overwhelming Rescue Power
Boasting a maximum current of 2000A (at 24V), it supports gasoline engines up to 9,000cc and diesel engines up to 13,000cc.
### Ultimate Safety
Since it does not use lithium batteries, there is no risk of fire or explosion, and it can be stored and used in harsh environments from -40°C to 70°C.
## Product Details
SPEEDER
Long Booster Cable for Ignic Max / SP-MAX1224
Total length: 145cm
Compatible model: Exclusively for Ignic Max (MTK-CE218)
*Cannot be used with Ignic Pro/Neo.
However, we have received numerous valuable requests from customers using it in the field daily, stating, 'Battery locations on large vehicles are often specialized, making standard cables difficult to reach,' and 'If the cable were a bit longer, I could place the device in a safer location to work.'
In response to these urgent voices from the field, we have developed a dedicated long cable to dramatically improve work safety and convenience.
## Features of the New 'Long Booster Cable for Ignic Max'
### Total Length of 145cm for Ease of Use
Significantly extended from the standard included cable (123cm total). By adding 11cm to both the positive and negative sides, it allows smooth connection even for large batteries with terminals spread far apart or located in deep, hard-to-reach areas.
### Improved Work Efficiency
The extra cable slack allows the jump starter unit to be placed on a stable, flat surface during operation, preventing accidental drops and operational errors.
### Designed Exclusively for Max
It is exclusively designed to safely transmit the high power of 12V/24V, maximizing the performance of the Ignic Max.
## About the 24V-Compatible Powerhouse: 'SPEEDER Ignic Max'
Serving as the base for the long cable, the 'SPEEDER Ignic Max' is a professional model that masters capacitor technology.
### Capacitor Type: No Pre-charging Required
Because it draws and amplifies the faint power remaining in the battery, no pre-charging or regular maintenance is needed.
### Overwhelming Rescue Power
Boasting a maximum current of 2000A (at 24V), it supports gasoline engines up to 9,000cc and diesel engines up to 13,000cc.
### Ultimate Safety
Since it does not use lithium batteries, there is no risk of fire or explosion, and it can be stored and used in harsh environments from -40°C to 70°C.
## Product Details
SPEEDER
Long Booster Cable for Ignic Max / SP-MAX1224
Total length: 145cm
Compatible model: Exclusively for Ignic Max (MTK-CE218)
*Cannot be used with Ignic Pro/Neo.
FAQ
How does it differ from the standard cable?
The long cable is 145cm, compared to the 123cm standard, accommodating complex battery layouts.
Which models are compatible?
It is exclusive to the SPEEDER Ignic Max (MTK-CE218).
Why is pre-charging unnecessary?
It uses capacitor technology to draw and amplify residual power from the vehicle battery.