AUTOart Announces Re-Release of McLaren Honda MP4/6 (Ayrton Senna) Model Following High Fan Demand
Key facts
- AUTOart Announces Re-Release of McLaren Honda MP4/6 (Ayrton Senna) Model Following High Fan Demand
- AUTOart has announced the re-release of its highly sought-after 1/18 scale McLaren Honda MP4/6 (Ayrton Senna) model, following overwhelming fan requests. Originally sold out for years, the detailed replica of the 1991 Japanese Grand Prix championship car will be available again starting late July 2026.
- Source: PR Times
- Date: June 15, 2026
Direct answer
AUTOart has announced the re-release of its highly sought-after 1/18 scale McLaren Honda MP4/6 (Ayrton Senna) model, following overwhelming fan requests. Originally sold out for years, the detailed replica of the 1991 Japanese Grand Prix championship car will be available again starting late July 2026.
- Citation
- AUTOart Announces Re-Release of McLaren Honda MP4/6 (Ayrton Senna) Model Following High Fan Demand (June 15, 2026), PR Times
- Source
- PR Times
- Date
- June 15, 2026
AUTOart has announced the re-release of its highly sought-after 1/18 scale McLaren Honda MP4/6 (Ayrton Senna) model, following overwhelming fan requests. Originally sold out for years, the detailed replica of the 1991 Japanese Grand Prix championship car will be available again starting late July 2026.
📋 Article Processing Timeline
- 📰 Published: June 15, 2026 at 19:11
- 🔍 Collected: June 15, 2026 at 10:21
- 🤖 AI Analyzed: June 16, 2026 at 01:48 (15h 26m after Collected)
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – With McLaren Logo
The 'McLaren Honda MP4/6' was introduced for the 1991 F1 season, combining McLaren's advanced carbon-fiber monocoque chassis with Honda's new V12 engine, the 'RA121E'. Enhanced front suspension and aerodynamic components boosted its performance, making it a dominant force on the track.
At the 15th round of the season, the Japanese Grand Prix held at Suzuka Circuit, Gerhard Berger claimed victory while Ayrton Senna finished second, securing his third Drivers' Championship title. This result also ensured McLaren-Honda's fourth consecutive double championship in both Drivers' and Constructors' standings.
AUTOart has meticulously recreated this iconic championship machine from Japan's F1 boom era through extensive research and on-site inspections. The model features stunning detail, including an engine bay and suspension system that can be viewed by removing the body panels. Two versions are available: one with the McLaren logo and one without.
*Due to its popularity, this model has been out of stock for years. The long-awaited re-release is now confirmed.
Pre-orders are now open, with a scheduled release in late July.
Official Online Store: https://autoartmodels-jp.shop/
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – With McLaren Logo – Model No. 89140
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – Model No. 89150
Features of the AUTOart 1/18 Scale McLaren Honda MP4/6
① Precision and Sharp Modeling Using 3D Data and Composite Diecast Technology
With cooperation from Honda, AUTOart conducted in-depth research on the car’s carbon-fiber monocoque and engine components. The team used both photography and 3D scanning to capture accurate data. Additionally, numerous period photographs were collected and analyzed to faithfully recreate the 1991 Japanese GP specification.
② Removable Body Panels and Carbon-Fiber Monocoque
The body panels are removable, allowing full visibility of the detailed carbon-fiber monocoque. This design mirrors the actual car’s structure—lightweight panels mounted over a rigid monocoque—aligning perfectly with AUTOart’s 'Composite Diecast Model' concept. The ABS resin body panels are thin and sharply molded, capturing delicate lines that metal cannot achieve.
A display stand for the body panels is included, designed to match the shape and color of those used at the time.
③ High-Fidelity Carbon-Fiber Monocoque
The carbon-fiber weave is accurately reproduced across the entire monocoque, reflecting variations in material and pattern by location. The complex front and rear suspension systems are also faithfully detailed. Tires are steerable left and right, and wheels include reproduced air valves.
④ V12 Engine with Air Funnel Reproduction
The induction pod is removable, revealing the internal air funnel. The intercooler and exhaust pipes, complete with heat discoloration effects, are crafted with realistic metallic textures.
⑤ Immersive Cockpit Detail
The cockpit is fully detailed, including switches and wiring.
The seat part features a fabric-textured seatbelt and a realistically textured seat surface.
⑥ Underside of the Chassis Accurately Reproduced
The underbody has been thoroughly researched and realistically recreated, including panel seams and color variations.
⑦ Available Variants
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – With McLaren Logo – Model No. 89140
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – Model No. 89150
(Product Information)
● Release Date: Late July 2026
● Price: ¥46,200 each (tax included)
● Scale: 1/18 (approx. 25 cm in length)
● Opening Parts: Removable front and rear body panels
● Moving Parts: Front wheel steering, rotating tires
● Sales Channels: AUTOart Official Online Store, hobby shops, online retailers, etc.
About the Miniature Car Brand 'AUTOart'
AUTOart was founded in 1998 as a premium diecast model brand.
Its proprietary 'AUTOart Composite Diecast Model' manufacturing method (patent granted) replaces traditional techniques, offering sharp, realistic modeling and full-opening features.
Each model is based on meticulous real-car research, ensuring accurate body shapes, glossy paint finishes, and precise panel gaps. Even small details like oil caps, wiring, instrument panels, and carpeting are faithfully reproduced. Each model is hand-assembled with strict quality control at a dedicated factory.
The 1/18 scale line, considered the brand's flagship, has produced over 1,500 models to date.
As a collectible brand, AUTOart is beloved by car and model enthusiasts worldwide.
Its lineup spans domestic and foreign vehicles, vintage cars, and the latest supercars, continuously expanding in scope.
● Distributor: Gateway AUTOart Japan Co., Ltd.
Official Website: https://www.autoartmodels-jp.com/
Official Online Store: https://autoartmodels-jp.shop/
X: https://x.com/AUTOart_JP
Instagram: https://www.instagram.com/autoartmodels_japan
The 'McLaren Honda MP4/6' was introduced for the 1991 F1 season, combining McLaren's advanced carbon-fiber monocoque chassis with Honda's new V12 engine, the 'RA121E'. Enhanced front suspension and aerodynamic components boosted its performance, making it a dominant force on the track.
At the 15th round of the season, the Japanese Grand Prix held at Suzuka Circuit, Gerhard Berger claimed victory while Ayrton Senna finished second, securing his third Drivers' Championship title. This result also ensured McLaren-Honda's fourth consecutive double championship in both Drivers' and Constructors' standings.
AUTOart has meticulously recreated this iconic championship machine from Japan's F1 boom era through extensive research and on-site inspections. The model features stunning detail, including an engine bay and suspension system that can be viewed by removing the body panels. Two versions are available: one with the McLaren logo and one without.
*Due to its popularity, this model has been out of stock for years. The long-awaited re-release is now confirmed.
Pre-orders are now open, with a scheduled release in late July.
Official Online Store: https://autoartmodels-jp.shop/
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – With McLaren Logo – Model No. 89140
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – Model No. 89150
Features of the AUTOart 1/18 Scale McLaren Honda MP4/6
① Precision and Sharp Modeling Using 3D Data and Composite Diecast Technology
With cooperation from Honda, AUTOart conducted in-depth research on the car’s carbon-fiber monocoque and engine components. The team used both photography and 3D scanning to capture accurate data. Additionally, numerous period photographs were collected and analyzed to faithfully recreate the 1991 Japanese GP specification.
② Removable Body Panels and Carbon-Fiber Monocoque
The body panels are removable, allowing full visibility of the detailed carbon-fiber monocoque. This design mirrors the actual car’s structure—lightweight panels mounted over a rigid monocoque—aligning perfectly with AUTOart’s 'Composite Diecast Model' concept. The ABS resin body panels are thin and sharply molded, capturing delicate lines that metal cannot achieve.
A display stand for the body panels is included, designed to match the shape and color of those used at the time.
③ High-Fidelity Carbon-Fiber Monocoque
The carbon-fiber weave is accurately reproduced across the entire monocoque, reflecting variations in material and pattern by location. The complex front and rear suspension systems are also faithfully detailed. Tires are steerable left and right, and wheels include reproduced air valves.
④ V12 Engine with Air Funnel Reproduction
The induction pod is removable, revealing the internal air funnel. The intercooler and exhaust pipes, complete with heat discoloration effects, are crafted with realistic metallic textures.
⑤ Immersive Cockpit Detail
The cockpit is fully detailed, including switches and wiring.
The seat part features a fabric-textured seatbelt and a realistically textured seat surface.
⑥ Underside of the Chassis Accurately Reproduced
The underbody has been thoroughly researched and realistically recreated, including panel seams and color variations.
⑦ Available Variants
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – With McLaren Logo – Model No. 89140
AUTOart 1/18 McLaren Honda MP4/6 Japanese Grand Prix 1991 #1 (Ayrton Senna) – Model No. 89150
(Product Information)
● Release Date: Late July 2026
● Price: ¥46,200 each (tax included)
● Scale: 1/18 (approx. 25 cm in length)
● Opening Parts: Removable front and rear body panels
● Moving Parts: Front wheel steering, rotating tires
● Sales Channels: AUTOart Official Online Store, hobby shops, online retailers, etc.
About the Miniature Car Brand 'AUTOart'
AUTOart was founded in 1998 as a premium diecast model brand.
Its proprietary 'AUTOart Composite Diecast Model' manufacturing method (patent granted) replaces traditional techniques, offering sharp, realistic modeling and full-opening features.
Each model is based on meticulous real-car research, ensuring accurate body shapes, glossy paint finishes, and precise panel gaps. Even small details like oil caps, wiring, instrument panels, and carpeting are faithfully reproduced. Each model is hand-assembled with strict quality control at a dedicated factory.
The 1/18 scale line, considered the brand's flagship, has produced over 1,500 models to date.
As a collectible brand, AUTOart is beloved by car and model enthusiasts worldwide.
Its lineup spans domestic and foreign vehicles, vintage cars, and the latest supercars, continuously expanding in scope.
● Distributor: Gateway AUTOart Japan Co., Ltd.
Official Website: https://www.autoartmodels-jp.com/
Official Online Store: https://autoartmodels-jp.shop/
X: https://x.com/AUTOart_JP
Instagram: https://www.instagram.com/autoartmodels_japan
FAQ
When will the MP4/6 model be re-released?
Scheduled for late July 2026. Pre-orders are now open on the official store.
What makes this model special?
Features include removable body panels, carbon monocoque, and 3D-scanned accuracy.
Where can I buy it?
Available on AUTOart’s official store, hobby shops, and online retailers.