Dramatically Simplify Pasta Cooking! 'Electric Pasta Pot paspo,' Achieving Professional-Level Results with No Stove and Hands-Off Cooking, to Launch on Makuake!

Mitsutani Denki Co., Ltd. (Headquarters: Tsubame City, Niigata / President: Ken Mitsutani) will begin pre-orders for its innovative cooking appliance, the 'Electric Pasta Pot,' which allows for easy pasta boiling without direct flame, on the support purchase service "Makuake."
Pre-sales will start on the crowdfunding site Makuake (https://www.makuake.com/project/shibaden4/) from 10:00 AM on May 27, 2026.

[Revolutionize Pasta Making] Just break the pasta, put it in, and leave it! Easy and delicious al dente results without a stove!
[Excellent Time Performance] Make another dish in your spare time. Make sauce on the free stove. Heat up a side dish in the free microwave!
[Works for Any Noodle] Not just pasta, but also udon, soba, Chinese noodles, and somen can be cooked easily and deliciously!

[Development Background: Soaring Demand for "Alternative Staples" Triggered by Rising Rice Prices]
The instability of rice prices has led to a sharp increase in demand for "alternative staples" like pasta and udon.
Pasta, in particular, is being re-evaluated as a "star of savings" in households due to its convenience, cost-effectiveness, and satisfying nature.
However, traditional pasta cooking has the problem of occupying a "large pot for boiling water" and a "stove burner" for an extended period. Thus, the 'Electric Pasta Pot' was born from the desire to let people enjoy pasta more freely and easily, liberating the stove by eliminating the need for direct flame.

[Three Key Features of the 'Electric Pasta Pot']
1. No Stove Needed! Hands-Off Cooking for Professional-Level Results
Once you boil the water and add the pasta, just leave the rest to this product.
Your home gas stove will be completely free while the pasta is cooking.
Even when you come home tired from work, just set it up and you're done. By the time you've changed and taken a breather, it will be cooked to a perfect, professional-level al dente.

2. Drastically Reduce Washing Up! A Special Lid with a Built-in Strainer
We've adopted a revolutionary design where the lid itself has strainer holes.
This eliminates the need for cooking utensils like a "colander," "bowl," and "pasta ladle (tongs)" that were necessary for draining after boiling. Since everything from cooking to draining is completed with this one unit, you can minimize the hassle of washing up.

3. A New, Efficient Style of "Breaking Pasta"
This product proposes a style of boiling pasta by breaking it in half.
Not only can you enjoy the satisfying snap and a slight sense of mischief from breaking the pasta, but it also ensures even cooking as it is fully submerged in the hot water. (*Of course, you can also cook it without breaking. In that case, please assist a little until the noodles are submerged in the water.)

Just break and add! Hands-off OK. No need to stand by. An electric pasta pot with excellent time performance.
The satisfaction and guilt of breaking pasta in half...
Besides enjoying this conflicting emotion, there are also clear benefits to breaking pasta for cooking.
*You can use it without breaking the pasta, but in that case, please watch over it for a bit until the noodles are submerged in the water.

■Product Specifications
Power: AC100V 50/60Hz
Power Consumption: 850W (High: 850W / Low: 450W)
Power Cord: Two-prong power cord, approx. 150cm
Body Height: Approx. 265mm (from base to top of lid)
Lid Outer Diameter: Approx. 160mm
Maximum Width: Approx. 218mm (including body outer diameter + handle protrusion of approx. 58mm)
Weight: 1.2kg
Maximum Capacity: 2L
Safety Features: Thermostat for boil-dry protection, built-in thermal fuse
*The design of the handle on the delivered product may differ slightly.

■Sales Overview
・Sales Start Date/Time: May 27, 2026 (Wednesday) 10:00 AM~
・Sales Format: Crowdfunding (Pre-sale)
・Product Name: Electric Pasta Pot paspo
・Project Page: https://www.makuake.com/project/shibaden4/

■Company Profile
Company Name: Mitsutani Denki Co., Ltd.
Representative: President Ken Mitsutani
Location: 3-5-2 Chuo-dori, Tsubame City, Niigata Prefecture
Phone Number: 0256-63-5253
Business Activities: Development, manufacturing, and sales of cooking appliances, beauty appliances, etc.
URL: https://www.ginzado.ne.jp/~mitsutani/