Customer's Vision Becomes Design and Manufacturing Data — Technoa Proposes New Concept "D2M"
Technoa proposes a new concept, "D2M (Design to Manufacture)," where customer designs directly become manufacturing data, and introduces "i-DESIGNER," a design simulation platform that realizes this. This transforms the customer's "joy of creation" into a "new strength" for businesses, streamlining the manufacturing process.
📋 Article Processing Timeline
- 📰 Published: May 7, 2026 at 19:50
- 🔍 Collected: May 7, 2026 at 11:01
- 🤖 AI Analyzed: May 7, 2026 at 11:20 (18 min after Collected)
Technoa Co., Ltd. (Headquarters: Gifu City, Gifu Prefecture; Representative Director: Koji Yamazaki) proposes a new manufacturing concept, "D2M (Design to Manufacture)."
This concept has been unveiled on May 1, 2026, on the brand page of the design simulation platform "i-DESIGNER."
D2M is a mechanism and concept where the act of customers operating a design simulator itself becomes manufacturing data.
◼️ Customer's image changes before reaching the factory
Orders for uniforms and original goods begin with the customer's desire to "do it this way."
However, waiting for email replies, calls not connecting, and repeated confirmations—as these interactions continue, the customer's enthusiasm gradually wanes.
As a result, despite the effort, it is not uncommon for customers' purchasing intent to decrease.
◼️ The act of "designing" becomes manufacturing data — What is D2M?
The "D" in "D2M" does not refer to a distribution channel like D2C (Direct to Consumer); it stands for "Design" (the act of designing). It is a concept that re-examines the starting point of manufacturing from a different axis than commercial distribution. Technoa is not a company that makes items itself, but provides a mechanism to deliver a "design experience" to manufacturers and e-commerce businesses.
Customers enjoy freely designing colors, parts, and text on the service pages of manufacturers and e-commerce businesses. The designed content is output directly as manufacturing data that can be used in the factory. Customer designs reach the manufacturing site without the need for email or phone confirmations.
"i-DESIGNER" is the platform that realizes this mechanism. It transforms the customer's "joy of creation" into a "new strength" for businesses. It can be integrated and used on the service pages of manufacturers and e-commerce businesses.
◼️ Case study of Fungo Co., Ltd. — Simulator changed the order flow
Fungo Co., Ltd. (Headquarters: Meguro-ku, Tokyo; Representative Director: Tetsuko Yamada), which manufactures and sells custom baseball uniforms, has already realized D2M.
Case study page: https://i-designer.com/case/06
Simulator used on Fungo's website
Before: Consultation after consideration
Customers would visit the website after deciding to order and then coordinate their image with a representative via email.
After: Creation from experience
First, enjoying designing with the simulator becomes the starting point, concretizing the image, leading to discussions within the customer's team, and eventually resulting in orders.
Comment from Representative Director Tetsuko Yamada:
"Once customers enjoy using the simulator and their image becomes concrete, the process of contacting us again has naturally become established. This has also led to an increase in our own fans."
The full details and comments from the person in charge can be found on the case study page.
◼️ New options for manufacturers and e-commerce businesses
Technoa accompanies manufacturers and e-commerce businesses as a partner, providing the "i-DESIGNER" system and offering management consulting from an IT perspective.
Companies with products where customers can be involved in design—such as apparel, sporting goods, and general merchandise—can apply the D2M concept to their own businesses.
◼️ Check out the D2M worldview and user experience
D2M logo mark
▼ D2M logo mark
Why a cube? — The D2M logo combines "DESIGN TO MANUFACTURE" on three faces, with "D2M" placed on top. Design and manufacturing are not separate processes but are connected as one. This idea has been given form.
The D2M concept and the actual simulator can be viewed on the brand page below.
▼ D2M Brand Page https://i-designer.com/d2m_br
For inquiries regarding introduction or media coverage, please contact us via the page above.
Technoa Co., Ltd.
■ Company Profile
Company Name: Technoa Co., Ltd.
Representative: Koji Yamazaki, Representative Director
Head Office Location: 8-8-1 Honjo Nakanomachi, Gifu City, Gifu Prefecture
Established: October 1985
Capital: 72.8 million JPY
Employees: 355 (as of April 1, 2026)
URL: https
This concept has been unveiled on May 1, 2026, on the brand page of the design simulation platform "i-DESIGNER."
D2M is a mechanism and concept where the act of customers operating a design simulator itself becomes manufacturing data.
◼️ Customer's image changes before reaching the factory
Orders for uniforms and original goods begin with the customer's desire to "do it this way."
However, waiting for email replies, calls not connecting, and repeated confirmations—as these interactions continue, the customer's enthusiasm gradually wanes.
As a result, despite the effort, it is not uncommon for customers' purchasing intent to decrease.
◼️ The act of "designing" becomes manufacturing data — What is D2M?
The "D" in "D2M" does not refer to a distribution channel like D2C (Direct to Consumer); it stands for "Design" (the act of designing). It is a concept that re-examines the starting point of manufacturing from a different axis than commercial distribution. Technoa is not a company that makes items itself, but provides a mechanism to deliver a "design experience" to manufacturers and e-commerce businesses.
Customers enjoy freely designing colors, parts, and text on the service pages of manufacturers and e-commerce businesses. The designed content is output directly as manufacturing data that can be used in the factory. Customer designs reach the manufacturing site without the need for email or phone confirmations.
"i-DESIGNER" is the platform that realizes this mechanism. It transforms the customer's "joy of creation" into a "new strength" for businesses. It can be integrated and used on the service pages of manufacturers and e-commerce businesses.
◼️ Case study of Fungo Co., Ltd. — Simulator changed the order flow
Fungo Co., Ltd. (Headquarters: Meguro-ku, Tokyo; Representative Director: Tetsuko Yamada), which manufactures and sells custom baseball uniforms, has already realized D2M.
Case study page: https://i-designer.com/case/06
Simulator used on Fungo's website
Before: Consultation after consideration
Customers would visit the website after deciding to order and then coordinate their image with a representative via email.
After: Creation from experience
First, enjoying designing with the simulator becomes the starting point, concretizing the image, leading to discussions within the customer's team, and eventually resulting in orders.
Comment from Representative Director Tetsuko Yamada:
"Once customers enjoy using the simulator and their image becomes concrete, the process of contacting us again has naturally become established. This has also led to an increase in our own fans."
The full details and comments from the person in charge can be found on the case study page.
◼️ New options for manufacturers and e-commerce businesses
Technoa accompanies manufacturers and e-commerce businesses as a partner, providing the "i-DESIGNER" system and offering management consulting from an IT perspective.
Companies with products where customers can be involved in design—such as apparel, sporting goods, and general merchandise—can apply the D2M concept to their own businesses.
◼️ Check out the D2M worldview and user experience
D2M logo mark
▼ D2M logo mark
Why a cube? — The D2M logo combines "DESIGN TO MANUFACTURE" on three faces, with "D2M" placed on top. Design and manufacturing are not separate processes but are connected as one. This idea has been given form.
The D2M concept and the actual simulator can be viewed on the brand page below.
▼ D2M Brand Page https://i-designer.com/d2m_br
For inquiries regarding introduction or media coverage, please contact us via the page above.
Technoa Co., Ltd.
■ Company Profile
Company Name: Technoa Co., Ltd.
Representative: Koji Yamazaki, Representative Director
Head Office Location: 8-8-1 Honjo Nakanomachi, Gifu City, Gifu Prefecture
Established: October 1985
Capital: 72.8 million JPY
Employees: 355 (as of April 1, 2026)
URL: https