PREDUCTS: Machined Cable Management Tool 'Magnet Cable Holder 2' Now On Sale
PREDUCTS Inc. has launched 'Magnet Cable Holder 2,' a magnetic cable management tool for smart desk organization, available from May 12, 2026. It features a minimalist design crafted from machined aluminum and strong holding power thanks to specially developed magnets.
📋 Article Processing Timeline
- 📰 Published: May 13, 2026 at 23:00
- 🔍 Collected: May 13, 2026 at 14:32
- 🤖 AI Analyzed: May 13, 2026 at 15:07 (35 min after Collected)
PREDUCTS Inc. (Headquarters: Minato-ku, Tokyo; Representative Director: Tsuyoshi Ando; hereinafter PREDUCTS) began selling its magnetic cable management tool, 'Magnet Cable Holder 2,' on May 12, 2026.
Product Page: https://preducts.jp/products/magnet-cable-holder-2
'Magnet Cable Holder 2' is a tool that attaches magnetically to desk legs or steel furniture, allowing users to route power cables along legs or bundle multiple cables together. It boasts a minimalist design achieved through machined aluminum and reliable holding power from specially developed magnets.
The main body is machined from aluminum with an anodized black finish. It can be installed anywhere there's a steel surface, allowing for smart organization of power cables that tend to hang on the floor or cables routed under the desk.
Development Background: Starting Point of Eliminating Dead Space
As the "2" indicates, this product is an upgraded version of its predecessor, 'Magnet Cable Holder.' While the basic functionality remains unchanged, the reason for developing the second generation was to resolve a certain "discomfort" that the developer himself felt.
This discomfort was the presence of "dead space" inside the previous model. The predecessor had a structure where commercially available general-purpose magnets were assembled into a sheet metal body, requiring space within the body to house the magnets. When viewed in cross-section, nearly half of the body became unused space, unable to hold cables.
Although functionally unproblematic, the question arose whether a tool designed to tidy up wiring should itself contain dead space. This concern became the starting point for its development.
Machined aluminum, adopted this time, achieved the "minimalist design" that was difficult to realize with sheet metal.
For the past few years, our company has continuously developed machined aluminum products. The accumulated sense of form and understanding of mechanisms possible only through machining are behind this simple product.
Developed a dedicated magnet. Firmly holds even thick cables.
Magnet surface/left side with the rubber sheet on the back peeled off. A specially developed plate-shaped magnet is fixed with screws.
During the development process, the most time-consuming aspect was balancing magnetic force and holding power.
We explored combinations that balanced magnetic force, slip resistance, and a sense of security when attached, by adjusting magnet placement and type, and the material and thickness of the contact surface. However, existing magnets could not achieve the desired magnetic force in the ideal size, so we ultimately developed a dedicated magnet.
Even with limited dimensions, it ensures sufficient strength to firmly hold thick cables or multiple cables bundled together. For more details on the development background, please refer to the JOURNAL article "Magnet Cable Holder 2: A Product to Be Confident in Precisely Because It's Unobtrusive."
About PREDUCTS DESK
PREDUCTS DESK is a desk equipped with the "DESK MODULAR SYSTEM®," which embeds four rails on the underside of the top plate to attach various modules.
Dedicated modules support desktop/laptop PCs, tablets, documents, small items, headphones, game consoles, and more. There are also adapters and holders for neatly routing cables, creating a highly convenient and tidy environment both above and below the desk. (Patented)
Product Page: https://preducts.jp/collections/desk-series
About PREDUCTS
We Make Tools for "Good Work"
We are a manufacturer of tools that create "good work."
Representative: Tsuyoshi Ando
Location: Aoyama Marutake Building 6F, 3-1-36 Minami Aoyama, Minato-ku, Tokyo 107-0062
Website: https://preducts.jp
X: https://x.com/preducts_inc/
Instagram: https://www.instagram.com/preducts_inc/
Product Page: https://preducts.jp/products/magnet-cable-holder-2
'Magnet Cable Holder 2' is a tool that attaches magnetically to desk legs or steel furniture, allowing users to route power cables along legs or bundle multiple cables together. It boasts a minimalist design achieved through machined aluminum and reliable holding power from specially developed magnets.
The main body is machined from aluminum with an anodized black finish. It can be installed anywhere there's a steel surface, allowing for smart organization of power cables that tend to hang on the floor or cables routed under the desk.
Development Background: Starting Point of Eliminating Dead Space
As the "2" indicates, this product is an upgraded version of its predecessor, 'Magnet Cable Holder.' While the basic functionality remains unchanged, the reason for developing the second generation was to resolve a certain "discomfort" that the developer himself felt.
This discomfort was the presence of "dead space" inside the previous model. The predecessor had a structure where commercially available general-purpose magnets were assembled into a sheet metal body, requiring space within the body to house the magnets. When viewed in cross-section, nearly half of the body became unused space, unable to hold cables.
Although functionally unproblematic, the question arose whether a tool designed to tidy up wiring should itself contain dead space. This concern became the starting point for its development.
Machined aluminum, adopted this time, achieved the "minimalist design" that was difficult to realize with sheet metal.
For the past few years, our company has continuously developed machined aluminum products. The accumulated sense of form and understanding of mechanisms possible only through machining are behind this simple product.
Developed a dedicated magnet. Firmly holds even thick cables.
Magnet surface/left side with the rubber sheet on the back peeled off. A specially developed plate-shaped magnet is fixed with screws.
During the development process, the most time-consuming aspect was balancing magnetic force and holding power.
We explored combinations that balanced magnetic force, slip resistance, and a sense of security when attached, by adjusting magnet placement and type, and the material and thickness of the contact surface. However, existing magnets could not achieve the desired magnetic force in the ideal size, so we ultimately developed a dedicated magnet.
Even with limited dimensions, it ensures sufficient strength to firmly hold thick cables or multiple cables bundled together. For more details on the development background, please refer to the JOURNAL article "Magnet Cable Holder 2: A Product to Be Confident in Precisely Because It's Unobtrusive."
About PREDUCTS DESK
PREDUCTS DESK is a desk equipped with the "DESK MODULAR SYSTEM®," which embeds four rails on the underside of the top plate to attach various modules.
Dedicated modules support desktop/laptop PCs, tablets, documents, small items, headphones, game consoles, and more. There are also adapters and holders for neatly routing cables, creating a highly convenient and tidy environment both above and below the desk. (Patented)
Product Page: https://preducts.jp/collections/desk-series
About PREDUCTS
We Make Tools for "Good Work"
We are a manufacturer of tools that create "good work."
Representative: Tsuyoshi Ando
Location: Aoyama Marutake Building 6F, 3-1-36 Minami Aoyama, Minato-ku, Tokyo 107-0062
Website: https://preducts.jp
X: https://x.com/preducts_inc/
Instagram: https://www.instagram.com/preducts_inc/