Noda Dental Clinic in Takaishi, Osaka Introduces Angel Aligner for Clear Aligner Orthodontics
Key facts
- Noda Dental Clinic in Takaishi, Osaka Introduces Angel Aligner for Clear Aligner Orthodontics
- Noda Dental Clinic in Takaishi City, Osaka Prefecture, has begun offering Angel Aligner, a clear aligner developed by Angelalign Technology. The aligners are specifically designed based on Asian jawbone morphology and dental arch tendencies. By utilizing the advanced 'iOrtho' software integrated directly with CT data, the clinic enables precise diagnosis and 3D simulations prior to treatment. This introduction allows the clinic to present patients with a choice between two orthodontic devices, aligning closely with individual preferences.
- Source: PR Times
- Date: May 20, 2026
Direct answer
Noda Dental Clinic in Takaishi City, Osaka Prefecture, has begun offering Angel Aligner, a clear aligner developed by Angelalign Technology. The aligners are specifically designed based on Asian jawbone morphology and dental arch tendencies. By utilizing the advanced 'iOrtho' software integrated directly with CT data, the clinic enables precise diagnosis and 3D simulations prior to treatment. This introduction allows the clinic to present patients with a choice between two orthodontic devices, aligning closely with individual preferences.
- Citation
- Noda Dental Clinic in Takaishi, Osaka Introduces Angel Aligner for Clear Aligner Orthodontics (May 20, 2026), PR Times
- Source
- PR Times
- Date
- May 20, 2026
Noda Dental Clinic in Takaishi City, Osaka Prefecture, has begun offering Angel Aligner, a clear aligner developed by Angelalign Technology. The aligners are specifically designed based on Asian jawbone morphology and dental arch tendencies. By utilizing the advanced 'iOrtho' software integrated directly with CT data, the clinic enables precise diagnosis and 3D simulations prior to treatment. This introduction allows the clinic to present patients with a choice between two orthodontic devices, aligning closely with individual preferences.
📋 Article Processing Timeline
- 📰 Published: May 20, 2026 at 22:30
- 🔍 Collected: May 20, 2026 at 14:01
- 🤖 AI Analyzed: May 20, 2026 at 14:06 (4 min after Collected)
Noda Dental Clinic (Director: Ken Noda) in Takaishi City, Osaka Prefecture, has begun offering the Angel Aligner as an option for clear aligner orthodontic treatment.
Angel Aligner is a clear orthodontic device developed by Angelalign Technology in China, featuring a design based on the jawbone morphology and dental arch tendencies of Asians. Since its inception in 2003, the brand has accumulated treatment data primarily in Asia and has been used in treatments for over 2 million people worldwide.
Our clinic has always valued orthodontic treatments tailored to each patient's dental alignment and lifestyle. With the introduction of the Angel Aligner, we now have a system where patients can choose by comparing devices, allowing us to propose plans more closely aligned with individual preferences.
Background of Introduction
Even when people decide to start orthodontic treatment, many encounter the question, "Which device is suitable for my teeth?"
Through daily counseling at Noda Dental Clinic, we have addressed the varying dental conditions of each patient, their awareness of appearance during treatment, and their perspectives on costs.
We have long received numerous requests from patients wanting to "choose after comparing several types of devices."
What is Angel Aligner?
Design Based on Asian Dental Data
Much of the treatment data accumulated by Angel Aligner comes from Asian cases.
The strength behind this device is its abundant data on dental patterns common among Asians, such as crowding where teeth cannot align due to a small jaw, protrusion of the mouth, and deep bites.
In the treatment planning software "iOrtho," dental CT data can be directly integrated without conversion.
Generally, corrections may occur during the conversion process, but this system allows for a more accurate diagnosis by using raw CT data to directly grasp the condition of the jawbone.
Our clinic is fully equipped with dental CTs, enabling the creation of treatment plans combined with this precise data. Furthermore, iOrtho can simulate tooth movement in 3D, allowing patients to preview their post-treatment dental alignment in advance.
Being able to proceed with consultations while concretely seeing "what will happen when the treatment is finished" provides peace of mind for patients.
Buttons for Elastics Built into the Aligners
In orthodontic treatment, "elastics" (rubber bands) are sometimes hooked onto teeth to adjust the bite.
While typical clear aligners require buttons to be attached directly to the tooth surface for this purpose, Angel Aligner integrates protrusions called "Angel Buttons" directly into the aligners.
The ability to potentially reduce the number of attachments placed directly on the teeth, and the fact that the mouth looks natural even when the aligners are removed, are reassuring points for those concerned about their appearance during treatment.
Aligners with Selectable Shapes According to the Case
Another design feature of this device is the ability to choose from three types of edge shapes (trim lines) for the aligners.
The attending dentist selects the appropriate type, ranging from covering only the teeth to covering close to the gums, depending on the patient's tooth shape and treatment content.
Being able to adjust the design to suit individual conditions, rather than a one-size-fits-all approach, leads to meticulous treatment.
Material Design and Stain Resistance
The Angel Aligner's material, "masterControl S," is a medical-grade polymer with excellent elasticity and resilience.
Advanced plans adopt a two-stage design using alternating soft (7 days) and hard (3 days) materials.
This flow allows for gradual force application: making large tooth movements with the soft material and fine-tuning positions with the hard material.
Additionally, it has high stain resistance, a characteristic that makes it easy to maintain the aligner's transparency during daily use.
During counseling, we are often asked, "Can I drink coffee or tea during treatment?" We do not recommend drinking anything other than water while wearing the aligners.
Please remove the aligners when eating or drinking.
Although Angel Aligner is a medical device that has not received approval under the Pharmaceutical and Medical Device Act in Japan, it has acquired international quality control standards, including those in China and the EU. Our clinic has introduced it after confirming its safety.
Please feel free to consult with us during counseling if you have any questions.
To a Counseling Session Where You Can Compare and Choose Between Two Devices
Our clinic supports two types of clear aligners. After carefully explaining in counseling which one suits your dental alignment and lifestyle, you can make your choice.
Treatment periods vary depending on the case, starting from a few months for mild cases to about 1 to 2 years for comprehensive orthodontics.
Angel Aligner is a clear orthodontic device developed by Angelalign Technology in China, featuring a design based on the jawbone morphology and dental arch tendencies of Asians. Since its inception in 2003, the brand has accumulated treatment data primarily in Asia and has been used in treatments for over 2 million people worldwide.
Our clinic has always valued orthodontic treatments tailored to each patient's dental alignment and lifestyle. With the introduction of the Angel Aligner, we now have a system where patients can choose by comparing devices, allowing us to propose plans more closely aligned with individual preferences.
Background of Introduction
Even when people decide to start orthodontic treatment, many encounter the question, "Which device is suitable for my teeth?"
Through daily counseling at Noda Dental Clinic, we have addressed the varying dental conditions of each patient, their awareness of appearance during treatment, and their perspectives on costs.
We have long received numerous requests from patients wanting to "choose after comparing several types of devices."
What is Angel Aligner?
Design Based on Asian Dental Data
Much of the treatment data accumulated by Angel Aligner comes from Asian cases.
The strength behind this device is its abundant data on dental patterns common among Asians, such as crowding where teeth cannot align due to a small jaw, protrusion of the mouth, and deep bites.
In the treatment planning software "iOrtho," dental CT data can be directly integrated without conversion.
Generally, corrections may occur during the conversion process, but this system allows for a more accurate diagnosis by using raw CT data to directly grasp the condition of the jawbone.
Our clinic is fully equipped with dental CTs, enabling the creation of treatment plans combined with this precise data. Furthermore, iOrtho can simulate tooth movement in 3D, allowing patients to preview their post-treatment dental alignment in advance.
Being able to proceed with consultations while concretely seeing "what will happen when the treatment is finished" provides peace of mind for patients.
Buttons for Elastics Built into the Aligners
In orthodontic treatment, "elastics" (rubber bands) are sometimes hooked onto teeth to adjust the bite.
While typical clear aligners require buttons to be attached directly to the tooth surface for this purpose, Angel Aligner integrates protrusions called "Angel Buttons" directly into the aligners.
The ability to potentially reduce the number of attachments placed directly on the teeth, and the fact that the mouth looks natural even when the aligners are removed, are reassuring points for those concerned about their appearance during treatment.
Aligners with Selectable Shapes According to the Case
Another design feature of this device is the ability to choose from three types of edge shapes (trim lines) for the aligners.
The attending dentist selects the appropriate type, ranging from covering only the teeth to covering close to the gums, depending on the patient's tooth shape and treatment content.
Being able to adjust the design to suit individual conditions, rather than a one-size-fits-all approach, leads to meticulous treatment.
Material Design and Stain Resistance
The Angel Aligner's material, "masterControl S," is a medical-grade polymer with excellent elasticity and resilience.
Advanced plans adopt a two-stage design using alternating soft (7 days) and hard (3 days) materials.
This flow allows for gradual force application: making large tooth movements with the soft material and fine-tuning positions with the hard material.
Additionally, it has high stain resistance, a characteristic that makes it easy to maintain the aligner's transparency during daily use.
During counseling, we are often asked, "Can I drink coffee or tea during treatment?" We do not recommend drinking anything other than water while wearing the aligners.
Please remove the aligners when eating or drinking.
Although Angel Aligner is a medical device that has not received approval under the Pharmaceutical and Medical Device Act in Japan, it has acquired international quality control standards, including those in China and the EU. Our clinic has introduced it after confirming its safety.
Please feel free to consult with us during counseling if you have any questions.
To a Counseling Session Where You Can Compare and Choose Between Two Devices
Our clinic supports two types of clear aligners. After carefully explaining in counseling which one suits your dental alignment and lifestyle, you can make your choice.
Treatment periods vary depending on the case, starting from a few months for mild cases to about 1 to 2 years for comprehensive orthodontics.
FAQ
What is Angel Aligner?
It is a clear orthodontic aligner developed in China, uniquely designed for Asian jaw structures and dental alignments.
Can I see the final result before starting treatment?
Yes. Using dental CT data integrated with 'iOrtho' software, you can preview the post-treatment alignment via a 3D simulation.
How long does the treatment take?
Depending on the case, it ranges from a few months for mild cases to 1-2 years for comprehensive orthodontics.