New Version Release of Model Order Reduction Software NewtonSuite-MOR
NewtonWorks Co., Ltd. has released "MOR 2025.1," the latest version of its proprietary program "NewtonSuite-MOR," which reduces the stiffness matrix of FEM models. This strengthens the collaboration between 3DFEM and 1DCAE, powerfully supporting front-loading and optimization in manufacturing design and development.
📋 Article Processing Timeline
- 📰 Published: May 12, 2026 at 18:00
- 🔍 Collected: May 12, 2026 at 09:31
- 🤖 AI Analyzed: May 12, 2026 at 10:14 (42 min after Collected)
NewtonWorks Co., Ltd. (Headquarters: Chuo-ku, Tokyo; Representative Director and President: Toshikazu Yamanashi) has released "MOR 2025.1," the latest version of its independently developed program "NewtonSuite-MOR," which reduces the stiffness matrix of FEM (Finite Element Method) models.
Technology to link product dynamic characteristics with system-level analysis (1DCAE)!
Bridging 3DFEM and 1DCAE: "NewtonSuite-MOR"
In design and development, simulations using detailed 3D models are indispensable. However, when understanding the behavior of the entire system in 1D CAE (system simulation), it has been difficult to directly incorporate 3D models with enormous degrees of freedom due to computational load. NewtonSuite-MOR utilizes Model Order Reduction (MOR) technology to accurately maintain the dynamic characteristics of created 3D models while reducing their complexity.
This powerfully supports "front-loading" and "design optimization" in increasingly complex product development environments.
*Reduction: This is a technology that reduces the shape information (stiffness matrix) used in 3DCAE to a state where arbitrary dynamic characteristics can be expressed.
Click here for MOR product overview.
Main Added Features
Command Execution Function
In addition to traditional GUI settings, batch execution using commands is now possible.
Application Scenes
1. Vibration Analysis: Conduct system-level evaluations while maintaining 3D vibration characteristics.
2. Control System Design: Verify control logic considering structural stiffness and damping.
3. Digital Twin Construction: Generate lightweight models that can be mounted on real-time simulators.
About NewtonWorks Co., Ltd.
NewtonWorks is an independent engineering solution provider that supports the manufacturing industry with advanced technical capabilities, with CAE (Computer Aided Engineering) as its core business. We offer a wide range of solutions covering all phases of product development, from detailed microscopic FEM (Finite Element Method) analysis of product physical behavior to macroscopic modeling of overall system behavior at the upstream stage with 1DCAE (system simulation), providing support to our customers.
A significant feature is also the deployment of our independently developed "NewtonSuite" software suite, which condenses the know-how cultivated through many years of support and consulting. In addition to selling these latest software, we provide one-stop services including advanced analysis consulting by experienced engineers, commissioned analysis, and specialized technical training. We solve challenges faced by Japanese manufacturing industries in various industrial fields such as automotive and energy with the power of technology, providing total backup for next-generation product development.
What is NewtonSuite?
NewtonSuite is NewtonWorks' original CAE software suite. NewtonSuite is our independently developed original software that meets customer demands. It has fulfilled customer requests like "it would be nice to have," addressing inconveniences in daily development work, including input data conversion tools between different software, tribology analysis tools, modeling of surface roughness and boundary nonlinearity, seal analysis, quality engineering tool integration, and performance effects due to tolerances.
What is NewtonSuite-MOR?
It is software that reduces the characteristics of 3DCAE. The reduced elements can be incorporated into 1DCAE like SimulationX. It was first released in 2013, developed ahead of its time.
Click here for MOR product overview.
Contact for this matter:
NewtonWorks Co., Ltd.
Marketing Group
Phone: 03-3535-2631
Email: info@newtonworks.co.jp
Keywords:
Technology to link product dynamic characteristics with system-level analysis (1DCAE)!
Bridging 3DFEM and 1DCAE: "NewtonSuite-MOR"
In design and development, simulations using detailed 3D models are indispensable. However, when understanding the behavior of the entire system in 1D CAE (system simulation), it has been difficult to directly incorporate 3D models with enormous degrees of freedom due to computational load. NewtonSuite-MOR utilizes Model Order Reduction (MOR) technology to accurately maintain the dynamic characteristics of created 3D models while reducing their complexity.
This powerfully supports "front-loading" and "design optimization" in increasingly complex product development environments.
*Reduction: This is a technology that reduces the shape information (stiffness matrix) used in 3DCAE to a state where arbitrary dynamic characteristics can be expressed.
Click here for MOR product overview.
Main Added Features
Command Execution Function
In addition to traditional GUI settings, batch execution using commands is now possible.
Application Scenes
1. Vibration Analysis: Conduct system-level evaluations while maintaining 3D vibration characteristics.
2. Control System Design: Verify control logic considering structural stiffness and damping.
3. Digital Twin Construction: Generate lightweight models that can be mounted on real-time simulators.
About NewtonWorks Co., Ltd.
NewtonWorks is an independent engineering solution provider that supports the manufacturing industry with advanced technical capabilities, with CAE (Computer Aided Engineering) as its core business. We offer a wide range of solutions covering all phases of product development, from detailed microscopic FEM (Finite Element Method) analysis of product physical behavior to macroscopic modeling of overall system behavior at the upstream stage with 1DCAE (system simulation), providing support to our customers.
A significant feature is also the deployment of our independently developed "NewtonSuite" software suite, which condenses the know-how cultivated through many years of support and consulting. In addition to selling these latest software, we provide one-stop services including advanced analysis consulting by experienced engineers, commissioned analysis, and specialized technical training. We solve challenges faced by Japanese manufacturing industries in various industrial fields such as automotive and energy with the power of technology, providing total backup for next-generation product development.
What is NewtonSuite?
NewtonSuite is NewtonWorks' original CAE software suite. NewtonSuite is our independently developed original software that meets customer demands. It has fulfilled customer requests like "it would be nice to have," addressing inconveniences in daily development work, including input data conversion tools between different software, tribology analysis tools, modeling of surface roughness and boundary nonlinearity, seal analysis, quality engineering tool integration, and performance effects due to tolerances.
What is NewtonSuite-MOR?
It is software that reduces the characteristics of 3DCAE. The reduced elements can be incorporated into 1DCAE like SimulationX. It was first released in 2013, developed ahead of its time.
Click here for MOR product overview.
Contact for this matter:
NewtonWorks Co., Ltd.
Marketing Group
Phone: 03-3535-2631
Email: info@newtonworks.co.jp
Keywords: