Ikeuchi Co., Ltd. (Kiri no Ikeuchi, Headquarters: Nishi-ku, Osaka) will hold "Industrial Dry Fog Humidification System Experience Sessions" at 5 locations nationwide (Tokyo, Osaka, Nagoya, Fukuoka, and Sendai) in July 2026.

Following the experience sessions in May, we received many inquiries and requests, leading to the decision to hold a "Free Demo Experience Session" in July, which will be the last before the humidification season.

This experience session is a participatory seminar where you can directly experience "Dry Fog," an extremely fine and uniform mist used as an industrial humidification system.

We will clearly explain methods and achievements, including cooling effects, as well as static and dryness countermeasures using two-fluid and one-fluid humidification systems, based on actual usage examples.

What will be covered in the experience session?

This event is recommended for those who are experiencing the following issues:

Troubled by variations in product quality due to humidity changes

Considering countermeasures for static electricity and dust

Wanting to concretely improve the site environment

Considering efficient humidification methods when updating equipment

Seeking cost reduction and improved energy-saving effects

Q&A sessions will be available throughout the experience session. You can feel free to consult us on-site about anything you are concerned about, such as "Which system is suitable for my company's environment?" or "What are the introduction costs?"

Scenes from past seminars. If you have any questions during the explanation, please ask them on the spot. We will answer your questions immediately.

Benefits of Attending

You can take home hints for solving your company's challenges, new energy-saving methods, and quality improvements.

You can learn about the introduction effects of the latest humidification systems.

Various humidifiers will be demonstrated. You can directly touch and experience the equipment and the mist.

You can directly consult about humidification measures tailored to your site's challenges.

Feedback from past participants

Participants have expressed satisfaction with the experience, particularly with the fineness of the dry fog mist and the benefits of system introduction.

"This would be safe even in a site with precision equipment."

"By actually touching the mist, I realized it was a non-wetting mist. I felt that it could be used even in a site with precision equipment."

— Electronic component mounting manufacturer

"It became easier to propose introduction to upper management."

"Specific figures like examples of cost recovery within approximately 2 years were introduced, so it is definitely worth considering."

— Printing company

"Humidity can be controlled without wetting products or molds."

"My challenges were dust adhering to molded products and painful static shocks during work. I was surprised to hear about cases of suppressing charging troubles and to see that the mist was completely non-wetting."

— On-site representative, resin molding factory

Electrostatic discharge damage to electronic components, intermittent stops and printing defects in printing processes, dust scattering in paper mills, warping and cracking of wood due to drying, fire hazards in rubber manufacturing and painting sites—. These troubles lead to reduced productivity and quality, resulting in significant losses.

Through humidification, we propose the construction of optimal humidity environments as an effective means to prevent troubles, improve quality, and promote energy saving and manufacturing cost reduction activities.

At the experience session, we will introduce our company's technologies, products, and achievements.

We will demonstrate humidifiers, control equipment, etc., used for site humidification. Please experience the "mist that doesn't wet even when touched."

"Humidification System Experience Session" Overview

– Tokyo Venue / Osaka Venue –

Date

・July 15, 2026 (Wed.)

・July 16, 2026 (Thu.)

Time

Morning Session: Starts at 10:00 (approx. 90 minutes)

Afternoon Session: Starts at 14:00 (approx. 90 minutes)

Venue

Tokyo Venue

Kiri no Ikeuchi Tokyo Sales Office

14F, LOOP-X, 3-9-15 Kaigan, Minato-ku, Tokyo

(Shuttle bus available from Tamachi Station)

Osaka Venue

Kiri no Ikeuchi Osaka Headquarters

Daiichi Kyogyo Bldg., 1-15-15 Awaza, Nishi-ku, Osaka

Application

Please apply from here

– Nagoya Venue / Sendai Venue –

Date

・July 22, 2026 (Wed.)

・July 23, 2026 (Thu.)

Time

Morning Session: Starts at 10:00 (approx. 90 minutes)

Afternoon Session: Starts at 14:00 (approx. 90 minutes)

Venue

Nagoya Venue

Kiri no Ikeuchi Nagoya Sales Office

3-118 Kibune, Meito-ku, Nagoya, Aichi

Sendai Venue

Kiri no Ikeuchi Sendai Branch

EARTH BLUE Sendai Kotodai, 1-6-10 Kamisugi, Aoba-ku, Sendai, Miyagi

Application

Please apply from here

– Fukuoka Venue –

Date

No specific dates are set for the Fukuoka venue.

If you contact us with your preferred timing for the experience session, we will contact you back to discuss the schedule.

Venue

Kiri no Ikeuchi Fukuoka Sales Office

2-8-1 Sanno, Hakata-ku, Fukuoka, Fukuoka

Application

Please apply from here

Application

Please select your preferred venue and date from the official page or the venues listed above and apply.

* Participation is free of charge.

* The "Morning Session" and "Afternoon Session" cover the same content. Please participate at a time that is convenient for you.

* This event is targeted at end-users. We kindly ask that individuals from trading companies, competitors, or those intending to solicit business with our company refrain from attending.

* This experience session will be held periodically in the future.

We hope that those who cannot attend this time will consider participating in future sessions.

Ikeuchi will continue to contribute to society using various types of mist.

We hope this experience session will be of assistance in resolving your challenges. We look forward to your participation.

Related Links

AirAKI (Two-fluid humidification system)

Humidification in production sites Dry Fog Humidifier AKIMist "E"

AirULM (One-fluid humidification system)

One-fluid humidifier AirLUM One-fluid humidifier LYOHMer E

Overview of Ikeuchi Co., Ltd.

Our company was founded in Kure City, Hiroshima Prefecture, as a manufacturer and seller of ceramic nozzles with guaranteed precision, the first in the world.

Since then, we have consistently developed methods for generating and utilizing "mist"—such as classifying mist for industrial use, developing the world's finest mist-generating nozzle [Dry Fog Nozzle], and various application businesses using mist—and have contributed to the creation of a rich and humid society by providing them to society.

Location: Daiichi Kyogyo Bldg., 1-15-15 Awaza, Nishi-ku, Osaka

Representative: Takaji Iwamura, Representative Director

Business Activities: Manufacturing and sales, as well as import and export, of industrial spray nozzles, industrial humidifiers, and related application equipment and systems.

URL: https://www.dry-fog.com/

FACT BOX

  • Source: PR TIMES
  • Category: Event