DJI to Exhibit at "8th International Construction and Surveying Equipment Exhibition (CSPI-EXPO 2026)"
DJI will exhibit at the "8th International Construction and Surveying Equipment Exhibition (CSPI-EXPO 2026)" held at Makuhari Messe from June 17-20, 2026. They will showcase drone surveying and remote inspection solutions to address challenges in the construction and surveying industries, with a special focus on the debut of their next-generation LiDAR sensor, the "Zenmuse L3," in Japan.
📋 Article Processing Timeline
- 📰 Published: June 12, 2026 at 20:10
- 🔍 Collected: June 12, 2026 at 11:21
- 🤖 AI Analyzed: June 12, 2026 at 16:52 (5h 31m after Collected)
DJI, the global leader in consumer drones and creative camera technology, will exhibit at the "8th International Construction and Surveying Equipment Exhibition (CSPI-EXPO 2026)" to be held at Makuhari Messe (Chiba City, Chiba Prefecture) from Wednesday, June 17 to Saturday, June 20, 2026.
The construction and surveying industries face significant challenges in balancing safety and productivity due to chronic labor shortages and the aging of skilled technicians. DJI ENTERPRISE will propose products and services that solve these issues and accelerate construction DX through drone surveying and remote inspection solutions.
At this exhibition, we will unveil the next-generation LiDAR sensor "Zenmuse L3" for the first time at a CSPI exhibition in Japan. You can experience a total solution that transforms construction site workflows, from the latest industrial drones and drone docks to software.
Exhibition Overview
Exhibition Name
8th International Construction and Surveying Equipment Exhibition (CSPI-EXPO 2026)
Dates
Wednesday, June 17, 2026 – Saturday, June 20, 2026, 10:00 AM – 5:00 PM
*Close at 4:00 PM on Saturday, June 20 (last day)
Venue
Makuhari Messe
Booth Number
27-20 / Hall 8
Official Website
https://cspi-expo.com/
Visitor Registration
https://cspi-expo.com/entry/
Visitor Registration
Exhibition Highlights
Highlight 1 | Zenmuse L3: First Public Display at a Japanese Exhibition
See the latest solution that meets the demand for high-precision 3D data acquisition in surveying and construction fields, with a live demonstration at the venue.
Long-Range and High-Precision Aerial LiDAR Solution
Long Range & High Precision: Max range 950m (10% reflectivity), altitude accuracy 3cm, planar accuracy 4cm (at 120m flight altitude)
High Efficiency: Covers up to 100 km² per day, supports pulse frequency up to 2000 kHz
Dual 100MP Cameras: Simultaneously acquire high-definition visible light data with a horizontal field of view of 107°
High Vegetation Penetration: Supports up to 16 returns, reliably acquiring data even under complex terrain and vegetation
Product Details Here
Highlight 2 | Booth Seminars
In addition to product displays, DJI JAPAN's booth will offer the following experiences and seminars.
*Guest speakers and lecture themes are subject to change.
Date
Time
Lecture Theme
June 17 (Wed)
11:00 AM
Utilizing DJI Dock 3 in Construction Sites - Leveraging Above-Cloud Radio and Level 3.5 Flight -
June 17 (Wed)
1:00 PM
Improving Efficiency and Advancement in Forest Management with Drones
June 17 (Wed)
3:00 PM
Actually, the Easiest Way for Anyone to Perform Drone-Based ICT Construction Surveying for Project Initiation and Progress Measurement
- A New Site Paradigm Managed by Construction Directors with Zero Surveying Knowledge -
June 17 (Wed)
4:00 PM
River Management DX with DJI Dock - On-site Demonstration of Unmanned, Fully Automated Flow Rate Observation
June 18 (Thu)
11:00 AM
Breaking Through Security Barriers! Automated Drone Operations on Construction Sites
Implementing DJI Dock in Business Operations
June 18 (Thu)
1:00 PM
Possibilities for Public Surveying Revealed Through Practical Verification of Zenmuse L3
- Practical Workflow from Flight Planning to Report Generation -
June 18 (Thu)
2:00 PM
Introduction to the SABOT Spray Can Ejection Device - From Simple Repairs to Wildlife Damage Control -
June 18 (Thu)
3:00 PM
Innovating "ICT Civil Engineering" and "Renewable Energy Development" in Real-World Sites with Matrice 400 × Zenmuse L3
June 18 (Thu)
4:00 PM
Redefining the Construction Industry with 3D Data
June 19 (Fri)
11:00 AM
3D Measurement of Mines - Utilization of Zenmuse L3 -
June 19 (Fri)
12:00 PM
Multi-Use of Drone Unmanned Operations and Community Contribution
June 19 (Fri)
1:00 PM
How DJI Zenmuse L3 Will Revolutionize Public Surveying
- Results Quality and Fieldwork Efficiency in Mountainous Area Surveying Compared to L2 -
June 19 (Fri)
2:00 PM
Practical Application of BIM/CIM Using DJI Products - Case Study of Productivity Improvement in Sabo Dam Construction Using Matrice 400 × Zenmuse P1/Zenmuse L2 -
June 19 (Fri)
3:00 PM
Advancement of Water Disaster Prevention and Water Environment Monitoring Technology in River Basins Using Multispectral Cameras × UAV
June 19 (Fri)
4:00 PM
Hello World - Simultaneous Operation of 3 Dock 3 Units by Small and Medium-Sized Construction Companies in Rural Areas
Highlight 3 | New Products Launched June 16 by DJI Also to be Exhibited
DJI Enterprise's next-generation transmission system. See it live at the venue.
Deliver Further, Deliver Further
Visitor Registration
Exhibited Products List
Category
Product Name
Drone Body
DJI MATRICE 400
DJI MATRICE 4 SERIES (4T / 4E)
DJI MATRICE 4D
DJI MATRICE 4TD
Docking Station
DJI DOCK 3
Payload
ZENMUSE L3
ZENMUSE P1
ZENMUSE H30 SERIES
ZENMUSE S1
ZENMUSE V1
Software
DJI TERRA
DJI FLIGHTHUB2
*Exhibited products are subject to change.
Check Details on the Official Website
About DJI
Since its founding in 2006, DJI has pioneered the consumer drone industry, driving innovation across a wide range of sectors, from professional filmmaking to agriculture, public safety, surveying and mapping, and infrastructure inspection. DJI products create new value in fields worldwide and are fundamentally changing the way people work.
DJI ENTERPRISE Official Channels
Website: https://enterprise.dji.com/jp
Facebook: https://www.facebook.com/DJIEnterpriseJP
X (formerly Twitter): https://x.com/DJIEnterprise
LinkedIn: https://www.linkedin.com/company/dji/
YouTube: https://www.youtube.com/DJIJapan
Instagram: https://www.instagram.com/dji_japan/
The construction and surveying industries face significant challenges in balancing safety and productivity due to chronic labor shortages and the aging of skilled technicians. DJI ENTERPRISE will propose products and services that solve these issues and accelerate construction DX through drone surveying and remote inspection solutions.
At this exhibition, we will unveil the next-generation LiDAR sensor "Zenmuse L3" for the first time at a CSPI exhibition in Japan. You can experience a total solution that transforms construction site workflows, from the latest industrial drones and drone docks to software.
Exhibition Overview
Exhibition Name
8th International Construction and Surveying Equipment Exhibition (CSPI-EXPO 2026)
Dates
Wednesday, June 17, 2026 – Saturday, June 20, 2026, 10:00 AM – 5:00 PM
*Close at 4:00 PM on Saturday, June 20 (last day)
Venue
Makuhari Messe
Booth Number
27-20 / Hall 8
Official Website
https://cspi-expo.com/
Visitor Registration
https://cspi-expo.com/entry/
Visitor Registration
Exhibition Highlights
Highlight 1 | Zenmuse L3: First Public Display at a Japanese Exhibition
See the latest solution that meets the demand for high-precision 3D data acquisition in surveying and construction fields, with a live demonstration at the venue.
Long-Range and High-Precision Aerial LiDAR Solution
Long Range & High Precision: Max range 950m (10% reflectivity), altitude accuracy 3cm, planar accuracy 4cm (at 120m flight altitude)
High Efficiency: Covers up to 100 km² per day, supports pulse frequency up to 2000 kHz
Dual 100MP Cameras: Simultaneously acquire high-definition visible light data with a horizontal field of view of 107°
High Vegetation Penetration: Supports up to 16 returns, reliably acquiring data even under complex terrain and vegetation
Product Details Here
Highlight 2 | Booth Seminars
In addition to product displays, DJI JAPAN's booth will offer the following experiences and seminars.
*Guest speakers and lecture themes are subject to change.
Date
Time
Lecture Theme
June 17 (Wed)
11:00 AM
Utilizing DJI Dock 3 in Construction Sites - Leveraging Above-Cloud Radio and Level 3.5 Flight -
June 17 (Wed)
1:00 PM
Improving Efficiency and Advancement in Forest Management with Drones
June 17 (Wed)
3:00 PM
Actually, the Easiest Way for Anyone to Perform Drone-Based ICT Construction Surveying for Project Initiation and Progress Measurement
- A New Site Paradigm Managed by Construction Directors with Zero Surveying Knowledge -
June 17 (Wed)
4:00 PM
River Management DX with DJI Dock - On-site Demonstration of Unmanned, Fully Automated Flow Rate Observation
June 18 (Thu)
11:00 AM
Breaking Through Security Barriers! Automated Drone Operations on Construction Sites
Implementing DJI Dock in Business Operations
June 18 (Thu)
1:00 PM
Possibilities for Public Surveying Revealed Through Practical Verification of Zenmuse L3
- Practical Workflow from Flight Planning to Report Generation -
June 18 (Thu)
2:00 PM
Introduction to the SABOT Spray Can Ejection Device - From Simple Repairs to Wildlife Damage Control -
June 18 (Thu)
3:00 PM
Innovating "ICT Civil Engineering" and "Renewable Energy Development" in Real-World Sites with Matrice 400 × Zenmuse L3
June 18 (Thu)
4:00 PM
Redefining the Construction Industry with 3D Data
June 19 (Fri)
11:00 AM
3D Measurement of Mines - Utilization of Zenmuse L3 -
June 19 (Fri)
12:00 PM
Multi-Use of Drone Unmanned Operations and Community Contribution
June 19 (Fri)
1:00 PM
How DJI Zenmuse L3 Will Revolutionize Public Surveying
- Results Quality and Fieldwork Efficiency in Mountainous Area Surveying Compared to L2 -
June 19 (Fri)
2:00 PM
Practical Application of BIM/CIM Using DJI Products - Case Study of Productivity Improvement in Sabo Dam Construction Using Matrice 400 × Zenmuse P1/Zenmuse L2 -
June 19 (Fri)
3:00 PM
Advancement of Water Disaster Prevention and Water Environment Monitoring Technology in River Basins Using Multispectral Cameras × UAV
June 19 (Fri)
4:00 PM
Hello World - Simultaneous Operation of 3 Dock 3 Units by Small and Medium-Sized Construction Companies in Rural Areas
Highlight 3 | New Products Launched June 16 by DJI Also to be Exhibited
DJI Enterprise's next-generation transmission system. See it live at the venue.
Deliver Further, Deliver Further
Visitor Registration
Exhibited Products List
Category
Product Name
Drone Body
DJI MATRICE 400
DJI MATRICE 4 SERIES (4T / 4E)
DJI MATRICE 4D
DJI MATRICE 4TD
Docking Station
DJI DOCK 3
Payload
ZENMUSE L3
ZENMUSE P1
ZENMUSE H30 SERIES
ZENMUSE S1
ZENMUSE V1
Software
DJI TERRA
DJI FLIGHTHUB2
*Exhibited products are subject to change.
Check Details on the Official Website
About DJI
Since its founding in 2006, DJI has pioneered the consumer drone industry, driving innovation across a wide range of sectors, from professional filmmaking to agriculture, public safety, surveying and mapping, and infrastructure inspection. DJI products create new value in fields worldwide and are fundamentally changing the way people work.
DJI ENTERPRISE Official Channels
Website: https://enterprise.dji.com/jp
Facebook: https://www.facebook.com/DJIEnterpriseJP
X (formerly Twitter): https://x.com/DJIEnterprise
LinkedIn: https://www.linkedin.com/company/dji/
YouTube: https://www.youtube.com/DJIJapan
Instagram: https://www.instagram.com/dji_japan/
FAQ
What will DJI announce at CSPI-EXPO 2026?
DJI will unveil the next-generation LiDAR sensor "Zenmuse L3" for the first time in Japan and exhibit drone surveying and remote inspection solutions for the construction and surveying industries.
When and where will CSPI-EXPO 2026 be held?
It will be held at Makuhari Messe (Chiba City, Chiba Prefecture) from Wednesday, June 17 to Saturday, June 20, 2026.
What are the main features of Zenmuse L3?
The Zenmuse L3 features a maximum range of 950m, high-precision 3D data acquisition, a work area coverage of up to 100 km² per day, simultaneous acquisition of visible light data with dual 100MP cameras, and high vegetation penetration.
What kind of lectures will be held at the DJI booth?
A wide range of topics are planned, including the utilization of DJI Dock 3, efficiency improvement in forest management, ICT construction surveying, river management DX, automated drone operations on construction sites, and the potential of Zenmuse L3 for public surveying.
What challenges in the construction and surveying industries does DJI aim to solve?
DJI aims to address challenges in the construction and surveying industries, such as chronic labor shortages and the aging of skilled technicians, by improving safety and productivity and accelerating construction DX through drone surveying and remote inspection solutions.