Anritsu Launches PCI Express® 7.0 Receiver Test Solution Supporting up to 128 GT/s
Anritsu Corporation has started selling a receiver test solution for its Signal Quality Analyzer-R MP1900A, enabling signal quality evaluation based on the PCI Express 7.0 (PCIe 7.0) Base Specification.
📋 Article Processing Timeline
- 📰 Published: June 4, 2026 at 19:14
- 🔍 Collected: June 4, 2026 at 10:20
- 🤖 AI Analyzed: June 7, 2026 at 00:05 (61h 44m after Collected)
Anritsu Corporation (President: Koichi Hamada) has started selling a receiver test solution for its Signal Quality Analyzer-R MP1900A that enables signal quality evaluation based on the Base Specification of PCI Express® 7.0 (PCIe® 7.0), a next-generation high-speed interface achieving transmission speeds of up to 128 GT/s.
This solution provides the generation of test signals with added noise and jitter, as well as automation functions for calibrating test signals and evaluating jitter tolerance using a partner's real-time oscilloscope. This reduces the burden on engineers due to increasingly complex evaluation conditions and enables signal quality evaluation with an eye toward standards compliance from the early stages of development.
Anritsu will contribute to the quality evaluation and design efficiency of PCIe-equipped devices through functional enhancements and standardization activities to support compliance testing aimed at certification by the PCI-SIG®, the PCIe standards body.
Background of Development
With the expansion of AI demand, AI servers, including data centers, are facing increasing demands for higher speed and capacity, and the transition to PCIe 7.0 is progressing for interfaces inside servers and storage. The base specification for PCIe 7.0 was established in June 2025, achieving a transmission speed of 128 GT/s, double that of the previous PCIe 6.0.
With this increase in speed, signal quality evaluation conditions are becoming more complex, requiring high-precision evaluation that balances measurement efficiency and reproducibility. Since even slight signal quality degradation can significantly impact communication performance, it is important to establish an environment capable of high-precision measurement and evaluation from the early stages of development.
Product Overview
The MP1900A is a high-performance BERT (Bit Error Rate Tester) that supports receiver testing for various high-speed interfaces such as PCIe, USB, Thunderbolt, DisplayPort, and 800 GbE. It provides a stable test environment with low residual jitter and high SNDR high-quality waveform output.
This PCIe 7.0 receiver test solution provides test pattern generation using 128 GT/s PAM4 signals, as well as automation functions for test signal calibration and jitter tolerance evaluation, to support compliance testing.
This solution provides the generation of test signals with added noise and jitter, as well as automation functions for calibrating test signals and evaluating jitter tolerance using a partner's real-time oscilloscope. This reduces the burden on engineers due to increasingly complex evaluation conditions and enables signal quality evaluation with an eye toward standards compliance from the early stages of development.
Anritsu will contribute to the quality evaluation and design efficiency of PCIe-equipped devices through functional enhancements and standardization activities to support compliance testing aimed at certification by the PCI-SIG®, the PCIe standards body.
Background of Development
With the expansion of AI demand, AI servers, including data centers, are facing increasing demands for higher speed and capacity, and the transition to PCIe 7.0 is progressing for interfaces inside servers and storage. The base specification for PCIe 7.0 was established in June 2025, achieving a transmission speed of 128 GT/s, double that of the previous PCIe 6.0.
With this increase in speed, signal quality evaluation conditions are becoming more complex, requiring high-precision evaluation that balances measurement efficiency and reproducibility. Since even slight signal quality degradation can significantly impact communication performance, it is important to establish an environment capable of high-precision measurement and evaluation from the early stages of development.
Product Overview
The MP1900A is a high-performance BERT (Bit Error Rate Tester) that supports receiver testing for various high-speed interfaces such as PCIe, USB, Thunderbolt, DisplayPort, and 800 GbE. It provides a stable test environment with low residual jitter and high SNDR high-quality waveform output.
This PCIe 7.0 receiver test solution provides test pattern generation using 128 GT/s PAM4 signals, as well as automation functions for test signal calibration and jitter tolerance evaluation, to support compliance testing.
FAQ
What problem does this solution solve?
It solves the complexity of signal quality evaluation and increased engineer workload due to the higher speeds of PCIe 7.0.
What is the MP1900A?
It is a high-performance BERT (Bit Error Rate Tester) from Anritsu that supports receiver testing for various high-speed interfaces.
When can this solution be purchased?
Sales have started at the time of this press release.