ANALYZER Co., Ltd. from Hiroshima Automates Hole Inspection Worldwide with Unique Laser Technology, Innovating Mass Production Sites with DX.
ANALYZER Co., Ltd. (Hiroshima) aims to automate 'hole inspection' for automotive and precision parts using proprietary non-contact laser technology, solving labor shortages and improving quality globally.
📋 Article Processing Timeline
- 📰 Published: April 1, 2026 at 09:00
- 🔍 Collected: April 1, 2026 at 01:00
- 🤖 AI Analyzed: April 24, 2026 at 05:30 (556h 29m after Collected)
ANALYZER Co., Ltd. is participating in the 'April Dream' project, which turns April 1st into a day for sharing dreams. This press release outlines the dream of ANALYZER Co., Ltd.
### Vision of ANALYZER Co., Ltd.
**"To become a Global Standard in the field of hole inspection and measurement."**
We aim to make our products and services more accessible and essential at manufacturing sites worldwide. By sincerely addressing our customers' challenges and helping them find solutions, we strive to realize our dream.
**"The Problem We Want to Solve"**
In manufacturing, many inspectors manually check thousands of parts daily to prevent even a single defect out of tens of thousands from leaking. This steady accumulation of effort has built Japan's competitiveness. However, in this era of major transformation, many mechanical part manufacturers, particularly in the automotive industry, still rely on visual inspection. Human-dependent tasks have become a significant challenge in quality control and costs, not only in Japan but also overseas, due to recent labor shortages and issues with passing down technical skills.
We aim to innovate mass production manufacturing by automating the highly difficult inspection of 'holes' using the 'ANALYZER series'—products born from Japan-originated technology and concepts. By liberating operators worldwide from high-burden tasks, we want to revolutionize the factory floor.
**"Specific Issues We Address"**
The 'ANALYZER' series solves the following problems:
- Manual visual inspection of holes:
- Quality depends on the inspector's skill/experience.
- Difficulty in inspecting deep or narrow holes.
- Rising inspection time and labor costs.
Key manufacturing sites where the ANALYZER series is effective:
- Automotive parts manufacturers
- Construction machinery parts suppliers
- Precision metal parts manufacturers
**"Voice of Customers"**
- "We reduced inspection man-hours by 75%, achieving cost savings that allow us to compete effectively on price."
- "Inspector workload was cut by 50%, and quality improved by eliminating human variability."
- "Missed defects became zero, and by adding AI judgment, over-detection also reached zero."
- "Production volume increased by 1.6 times while reducing physical workload."
- "By reviewing inspection standards and improving preceding processes, yield improved significantly."
- "The settings are abundant and understand the field, making the application easy to operate."
**"What is Hole Inspection via the ANALYZER Series?"**
The ANALYZER series achieves non-destructive, non-contact inner wall inspection of cylindrical shapes using laser light emitted from an inspection probe. By rotating and irradiating laser light onto the cylindrical inner wall and digitizing the reflected light, it detects defects and automatically performs pass/fail judgment.
### Vision of ANALYZER Co., Ltd.
**"To become a Global Standard in the field of hole inspection and measurement."**
We aim to make our products and services more accessible and essential at manufacturing sites worldwide. By sincerely addressing our customers' challenges and helping them find solutions, we strive to realize our dream.
**"The Problem We Want to Solve"**
In manufacturing, many inspectors manually check thousands of parts daily to prevent even a single defect out of tens of thousands from leaking. This steady accumulation of effort has built Japan's competitiveness. However, in this era of major transformation, many mechanical part manufacturers, particularly in the automotive industry, still rely on visual inspection. Human-dependent tasks have become a significant challenge in quality control and costs, not only in Japan but also overseas, due to recent labor shortages and issues with passing down technical skills.
We aim to innovate mass production manufacturing by automating the highly difficult inspection of 'holes' using the 'ANALYZER series'—products born from Japan-originated technology and concepts. By liberating operators worldwide from high-burden tasks, we want to revolutionize the factory floor.
**"Specific Issues We Address"**
The 'ANALYZER' series solves the following problems:
- Manual visual inspection of holes:
- Quality depends on the inspector's skill/experience.
- Difficulty in inspecting deep or narrow holes.
- Rising inspection time and labor costs.
Key manufacturing sites where the ANALYZER series is effective:
- Automotive parts manufacturers
- Construction machinery parts suppliers
- Precision metal parts manufacturers
**"Voice of Customers"**
- "We reduced inspection man-hours by 75%, achieving cost savings that allow us to compete effectively on price."
- "Inspector workload was cut by 50%, and quality improved by eliminating human variability."
- "Missed defects became zero, and by adding AI judgment, over-detection also reached zero."
- "Production volume increased by 1.6 times while reducing physical workload."
- "By reviewing inspection standards and improving preceding processes, yield improved significantly."
- "The settings are abundant and understand the field, making the application easy to operate."
**"What is Hole Inspection via the ANALYZER Series?"**
The ANALYZER series achieves non-destructive, non-contact inner wall inspection of cylindrical shapes using laser light emitted from an inspection probe. By rotating and irradiating laser light onto the cylindrical inner wall and digitizing the reflected light, it detects defects and automatically performs pass/fail judgment.