[New Release] Developed Based on User Feedback. Easy to Place, "Fits Snugly" Even in Limited Spaces. Wine Cellars "funvino 50" and "funvino 100" Safeguard Daily Wine Quality in Commercial Settings.
Global Inc. is launching new wine cellar models, "funvino 50" and "funvino 100," from its "funvino" brand on May 11, 2026. Designed for restaurants and hotels, these space-saving units are easy to install under counters or in narrow passages, ensuring wine quality.
📋 Article Processing Timeline
- 📰 Published: April 28, 2026 at 20:31
- 🔍 Collected: April 28, 2026 at 12:01
- 🤖 AI Analyzed: April 28, 2026 at 12:27 (25 min after Collected)
Left: funvino 50 (JC-145A) / Right: funvino 100 (JC-275AF)
Global Inc. (Head Office: Osaka City, Representative Director: Osamu Wada) is launching "funvino 50" and "funvino 100" from its wine cellar brand "funvino," which it plans and sells. They are scheduled to be released on Monday, May 11, 2026.
In restaurants and hotels that serve wine daily, space constraints for installation often arise due to store size and layout.
In response to these installation space constraints, we have developed the single-temperature zone models "funvino 50" and "funvino 100," which can be selected according to installation conditions.
## Product Features
### "funvino 50," a 50-bottle storage model that can be installed under a counter
Image of "funvino 50" installed under a counter.
With a height of approximately 82cm, it is possible to effectively utilize under-counter space.
This is a single-temperature zone wine cellar that combines ease of use in daily serving operations with a good size feeling capable of storing 50 bottles.
It adopts a front intake and exhaust structure that expels compressor heat from the lower front of the cellar and draws in outside air.
Therefore, the heat dissipation space required at the back and sides is as small as approximately 3cm, allowing for space-saving installation. It also supports built-in installation.
(※When installing 3 or more units side by side as a built-in, please ensure sufficient space at the top and back.)
Front intake and exhaust, exhaust port part
The storage capacity is approximately 50 bottles. Both Bordeaux and Burgundy type bottles can be stored efficiently.
Furthermore, by removing the racks, bottles can be stored upright, allowing for the management of opened wine.
Burgundy type bottle storage image
Bordeaux type bottle storage image
Upright storage image at the bottom
### "funvino 100," a large-capacity wine cellar with a slim design that accommodates approximately 100 bottles
Image of "funvino 100" installed in a passage.
With a slim design of approximately 53cm in depth, this is a single-temperature zone wine cellar that can store 84 to 108 bottles, easy to install even in limited spaces such as passages and backyards.
It adopts a front intake and exhaust structure that expels compressor heat from the lower front of the cellar and draws in outside air.
Therefore, the heat dissipation space required at the back and sides is as small as approximately 3cm, allowing for space-saving installation. It also supports built-in installation.
(※When installing 3 or more units side by side as a built-in, please ensure sufficient space at the top and back.)
Front intake and exhaust, exhaust port part
Despite its slim design, it can store up to approximately 108 Burgundy type bottles if only Burgundy type bottles are used. Even when mixed with Bordeaux type bottles, approximately 100 bottles of wine can be stored efficiently.
Maximum 108 bottles when storing only Burgundy type bottles
Maximum 84 bottles when storing only Bordeaux type bottles
Furthermore, by removing the racks, bottles can be stored upright, allowing for the management of opened wine.
Image of upright storage by removing the bottom rack
Since approximately 100 bottles of wine can be managed by a single unit, it is suitable for storing stock wine for serving. In addition, by removing the bottom rack and storing bottles upright, it can handle both opened wine storage and daily serving wine management in one go. It can be used flexibly according to store operations, making it suitable for stores that want to manage many wines despite space constraints.
### Common Features of funvino 50 / funvino 100
"funvino" is designed with three concepts in mind as a daily cellar supporting daily wine service: "wine-first," "user-first," and "cellar-first."
- Wine-first design: Consideration for temperature, humidity, and vibration to maintain wine quality.
- User-first design: Commitment to daily ease of use to support the operation of wine professionals in the field.
- Cellar-first design: Designed to reduce the burden on the machine so that it can be used for a long time.
Based on these ideas, it is equipped with various functions to maintain wine quality and support daily operations.
- High-power compressor for speedy temperature setting
A high-power compressor that quickly reaches the set temperature even with short operating times is adopted. It minimizes the load on the cellar and enables stable temperature control.
- Cold insulation structure with consideration for insulation and heat shielding effects
- Thick high-density insulation material is used for the inner walls of the cabinet.
- The glass door uses "Low-E glass" with excellent insulation and heat shielding properties.
"Low-E glass" has "Low-E" on the inside of two tempered glass panes.
Global Inc. (Head Office: Osaka City, Representative Director: Osamu Wada) is launching "funvino 50" and "funvino 100" from its wine cellar brand "funvino," which it plans and sells. They are scheduled to be released on Monday, May 11, 2026.
In restaurants and hotels that serve wine daily, space constraints for installation often arise due to store size and layout.
In response to these installation space constraints, we have developed the single-temperature zone models "funvino 50" and "funvino 100," which can be selected according to installation conditions.
## Product Features
### "funvino 50," a 50-bottle storage model that can be installed under a counter
Image of "funvino 50" installed under a counter.
With a height of approximately 82cm, it is possible to effectively utilize under-counter space.
This is a single-temperature zone wine cellar that combines ease of use in daily serving operations with a good size feeling capable of storing 50 bottles.
It adopts a front intake and exhaust structure that expels compressor heat from the lower front of the cellar and draws in outside air.
Therefore, the heat dissipation space required at the back and sides is as small as approximately 3cm, allowing for space-saving installation. It also supports built-in installation.
(※When installing 3 or more units side by side as a built-in, please ensure sufficient space at the top and back.)
Front intake and exhaust, exhaust port part
The storage capacity is approximately 50 bottles. Both Bordeaux and Burgundy type bottles can be stored efficiently.
Furthermore, by removing the racks, bottles can be stored upright, allowing for the management of opened wine.
Burgundy type bottle storage image
Bordeaux type bottle storage image
Upright storage image at the bottom
### "funvino 100," a large-capacity wine cellar with a slim design that accommodates approximately 100 bottles
Image of "funvino 100" installed in a passage.
With a slim design of approximately 53cm in depth, this is a single-temperature zone wine cellar that can store 84 to 108 bottles, easy to install even in limited spaces such as passages and backyards.
It adopts a front intake and exhaust structure that expels compressor heat from the lower front of the cellar and draws in outside air.
Therefore, the heat dissipation space required at the back and sides is as small as approximately 3cm, allowing for space-saving installation. It also supports built-in installation.
(※When installing 3 or more units side by side as a built-in, please ensure sufficient space at the top and back.)
Front intake and exhaust, exhaust port part
Despite its slim design, it can store up to approximately 108 Burgundy type bottles if only Burgundy type bottles are used. Even when mixed with Bordeaux type bottles, approximately 100 bottles of wine can be stored efficiently.
Maximum 108 bottles when storing only Burgundy type bottles
Maximum 84 bottles when storing only Bordeaux type bottles
Furthermore, by removing the racks, bottles can be stored upright, allowing for the management of opened wine.
Image of upright storage by removing the bottom rack
Since approximately 100 bottles of wine can be managed by a single unit, it is suitable for storing stock wine for serving. In addition, by removing the bottom rack and storing bottles upright, it can handle both opened wine storage and daily serving wine management in one go. It can be used flexibly according to store operations, making it suitable for stores that want to manage many wines despite space constraints.
### Common Features of funvino 50 / funvino 100
"funvino" is designed with three concepts in mind as a daily cellar supporting daily wine service: "wine-first," "user-first," and "cellar-first."
- Wine-first design: Consideration for temperature, humidity, and vibration to maintain wine quality.
- User-first design: Commitment to daily ease of use to support the operation of wine professionals in the field.
- Cellar-first design: Designed to reduce the burden on the machine so that it can be used for a long time.
Based on these ideas, it is equipped with various functions to maintain wine quality and support daily operations.
- High-power compressor for speedy temperature setting
A high-power compressor that quickly reaches the set temperature even with short operating times is adopted. It minimizes the load on the cellar and enables stable temperature control.
- Cold insulation structure with consideration for insulation and heat shielding effects
- Thick high-density insulation material is used for the inner walls of the cabinet.
- The glass door uses "Low-E glass" with excellent insulation and heat shielding properties.
"Low-E glass" has "Low-E" on the inside of two tempered glass panes.