[New Product] Announcing the "Raise3D T Series," a New Standard for Industrial 3D Printers. APAC Debut at Next Generation 3D Printer Expo 2026

T450 (left) / T700 (right)

Nihon 3D Printer Co., Ltd. (Head Office: Chuo-ku, Tokyo, Representative Director: Tomohiro Kitagawa), a provider of 3D digital solutions for businesses and educational institutions, announces the new generation high-performance 3D printers "Raise3D T Series (T450, T700)" which will set a new standard for industrial 3D printing. This series will make its APAC (Asia-Pacific) debut, ahead of the rest of the world, at the "Next Generation 3D Printer Expo 2026" held at Tokyo Big Sight from July 1, 2026 (Wed). Pre-orders for the "T450" will also begin on the same day.

Background of T Series Development

In the past, manufacturing sites introducing 3D printers faced challenges related to size, quality, and efficiency, such as "segmented printing due to physical limitations of the build volume," "variability in production quality," and "long lead times and limits on daily production volume."

The Raise3D T Series is a product that will truly be a "game changer" for manufacturing sites, solving these challenges and realizing stable print quality, integrated molding of large sizes, and shortened lead times through high productivity.

Main Features of "Raise3D T450" (Pre-orders start July 1, 2026 / Shipping scheduled from October onwards)

The T450 is a new generation flagship model boasting industrial-class production capacity.

T450

Ultra-Large Build Volume

Features a large build area of 450 x 350 x 400 mm (63 liters).

4WD CoreXY Structure

4WD CoreXY Structure

This is the world's first adoption of a 4WD CoreXY structure driving four motors in a mass-produced 3D printer. It eliminates belt delays and improves response speed by 30%.

Overwhelmingly Fast Printing

Boasts a printing speed of up to 600 mm/s, a travel speed of 1500 mm/s, and an acceleration of 30,000 mm/s2, improving efficiency by up to 40%.

Dual Extrusion with Single Nozzle via Proprietary "Twin Flow"

T450's extruder unit

Enables seamless continuous printing without the need for calibration and without seams during material switching. The maximum daily production volume reaches 3.5 kg.

Thermal Control Compatible with High-Performance Materials

T450's nozzle section

Equipped with an ultra-high temperature nozzle up to 420°C and an active constant temperature chamber that can be heated up to 70°C, it supports a wide range of industrial materials.

Full Automation and Unattended Operation

Sensors installed on the T450

Equipped with over 20 sensors and AI visual detection (spaghetti detection, nozzle clog detection, etc.) using dual HD cameras.

<For detailed information on T450, please check the following site>

https://www.raise3d.jp/3dprinter/t450

Main Features of "Raise3D T700" (Official sales expected to start in 2027)

The T700 is a one-stop solution for large parts, featuring Raise3D's largest build volume.

T750

Astonishing Print Size

Features an ultra-large volume space of 700 x 500 x 1000 mm (350 liters).

Freedom from Segmentation and Bonding

Enables integrated molding of large parts that previously required segmentation and bonding, such as automotive parts and aerospace interior components, significantly improving structural strength and overall accuracy.

Promoting Strategic Corporate Innovation

With a build height reaching 1 meter, in-house production of large parts becomes possible.

Promotes innovation utilizing unprecedented scale in development and manufacturing sites.

<For information on T700, please check the following site>

https://www.raise3d.jp/3dprinter/t700

※Detailed information will be released sequentially at a later date.

Event Exhibition Information

This product will be exhibited in person at the following exhibition currently underway from July 1st.

Next Generation 3D Printer Expo

Exhibition Name: 9th Next Generation 3D Printer Expo Tokyo / AM JAPAN 2026

Booth Number: West Hall W14-10 (Raise3D)

Dates: July 1, 2026 (Wed) - July 3 (Fri)

Venue: Tokyo Big Sight

Exhibition Content: Live demonstration of Raise3D T450 and T700

Advance Visitor Registration: Register here

※Advance registration (free) is required for exhibition entry.

【About Nihon 3D Printer Co., Ltd.】

Nihon 3D Printer Co., Ltd. supports customer 3D printer utilization with a track record of selling 5,000 Raise3D products and a support system by technicians with manufacturer-certified qualifications.

Head Office: 1F, CROSS DOCK HARUMI, 4-7-4 Harumi, Chuo-ku, Tokyo 104-0053

Representative: Tomohiro Kitagawa, Representative Director

Established: October 2013

Phone Number: 03-3520-8928 (Main)

URL: https://3dprinter.co.jp/

Business Activities: Handling and provision of services for 3D printers / 3D scanners / software, and support.